7-gram aerosol extinguishment is almost the world’s smallest fire suppression unit in the world, its size is only a diameter of 40 millimeters, and its height is no more than 20 millimeters, such a small product almost can be installed in any small and narrow space.
We have many installation cases, such as electric meter boxes, small electrical cabinets, lithium battery cylinders, battery compartments for power exchange cabinets, small switchboards, and high-voltage cable explosion-proof connectors.
This aerosol extinguishment is an innovative technology in the fire suppression industry because of the following advantages:
- It works automatically.
- It has a very stylish appearance, its cylinder is specially made by one of our skilled technicians who has over 40 years of design experience.
- The cylinder itself does not carry any pressure.
- It is a small size, and it can make protection for every small space.
- Its extinguishing agent is made up of the main oxidants of potassium nitrate and strontium nitrate, which are green materials.
Below are the main parameters and datasheet:
- Item Number: QRR0.007G/S/SA.
- Specification: φ40*H20 mm (as large as QRR0.012G/S/SA)
- Mount Hole Spacing: φ4*54 millimeters.
- Product Concentration: Less than 60 to 100 grams per m3.
- Suppression Volume: ≤0.1 cubic meters.
- The rated Temperature of the Thermal Sensing Line is 175℃.
- Releasing Time: ≤4 Seconds.
- Actuator Current: More than 700mA (Direct Current).
- Safe Current: ≤150mA (Direct Current).
- Electric Start-up Time: Less than 1 seconds.
- Ambient Temperature Range: Minimum -50℃, Maximum +95℃.
- Service Time: ten to fifteen years.
- Warranty Period: one year.
- Compatibility: It can work standalone can work with fire alarm devices, and can comply with Thermal Activation Devices.
The price of aerosol fire extinguishing systems varies according to different order requirements.
In terms of price, some other competitive products have appeared on the market, such as FM200, Fire Detection Tube, Dry Chemical, etc.
However, compared to others, aerosols have unique advantages and their fire extinguishing principles are also different, Therefore, Aerosol fire extinguishers remain a hot seller on the market.
There are some other manufacturers of aerosol extinguishing systems on the world market. but we are the only manufacturer that produces generation four (4G) advanced aerosol products based on the newest and innovative aerosol technology.
We produce an S-type strontium nitrate aerosol extinguishment system, while others produce K-type potassium nitrate aerosol. S-type aerosols are better than K-type aerosols in all aspects.
This product is becoming more and more popular and some lithium battery suppliers are very interested in it because it has the following features and characteristics:
- Small size.
- Lightweight.
- Space saving.
- Large capacity.
- Fast to suppress fire.
- Non pressurized cylinder.
- Easy to operate and install.
- Long life span.
- Most importantly, it is CLEAN AGENT, after releasing the smoke-like gas runs out from the nozzle without leaving any residue.
However aerosol systems also have their disadvantages, that is: after releasing, the cylinder is very hot.
Therefore, please handle it carefully after spraying and wait until its cylinder has cooled down before moving it.
Since it is a popular fire extinguishing product, we can imagine that it can be applied in a lot of places, here we list some application places, but not limited to these places:
- Electrical panel.
- Control cabinet.
- Meter cabinets.
- the battery compartment, especially lithium-ion batteries.
- Wind turbine control equipment.
- Auto vehicles control device.
- Solar panels.
Aerosol fire extinguishers are classified as Class 9.1 Hazardous Goods and therefore need to be handled with care.
When handling, storing, installing, and debugging, please pay attention to the following matters:
- Anyone (except old people and children) can install this product, but should be as per the INSTALLATION MANUAL.
- Do not disassemble this device at any time, our company is not responsible for any accident because of this matter.
- Please do not touch the hot cylinder immediately after the extinguishing unit is sprayed.
- Store it in a dry and ventilated place, avoid rain and sun.
- If you accidentally come into contact with an aerosol compound, then wash your hands immediately with water.
- When doing system debugging, make sure the power is off, to avoid activation by mistake.
