The power distribution room, Power Generation Room, Switchgear, and Substations are places where easy to catch fire, because a lot of electrical cabinets and control panels are over there, it is necessary to have an aerosol extinguishing system installed in these fire-prone areas.
You can have complete confidence in our min aerosol fire protection system Because it adopts innovative nano suppression technology and has now been widely applied in many industries, such as the transportation industry, marine industry, oil and gas industry, mining industry, manufacturing industry, aviation industry, new energy industry, etc.
We have many international cases of its application in power distribution rooms and corresponding electrical cabinets.
Here we recommend a 750 grams electrically activated aerosol fire protection system, its basic technical data are as follows:
Model: 750E (AW-QH-750E)
Product Measurement: 167 mm in diameter, and 204 mm in height.
Extinguishing Volume: 7.5 cubic meters.
Fire Suppression Time: 14 to 15 seconds.
Weight of Aerosol Fire Extinguishing Agent: 750 grams.
Starting Method: Electrical activation, electronics, electric power supply, DC 3-24 volts, and AC 3-220 volts.
The Aerosol Agent Color is brown.
Cylinder Color and Material: 304 stainless steel with silver-white color.
Weight of the Fire Extinguishing Generator: 5400 grams.
Product Lifetime: 10 to 15 years.
Fire Extinguishing Ability Class: Class A, Class B, Class C, Class E and Class F.
When installing this product in a power distribution room, please have the installer wear anti-static clothing to avoid the product being activated by static electricity.
Furthermore, be sure to install the product without power on!
Please use the correct wiring method. For more details, please refer to our installation guide.
Because all distribution rooms have electrical cabinets or control cabinets, we recommend installing an aerosol fire protection system on these electrical cabinets. The suitable model is a 150-gram thermally activated aerosol extinguisher.
This product has many special features:
The power distribution room normally is not able to install a big fire suppression system, like an FM200 system, Novec1230 system, or foam system, while a mini aerosol system is an alternative.
There are many electrical cabinets or control panels in a power distribution room, so aerosol cannot only be installed inside the room but also can be installed in the cabinet.
Aerosol is a clean agent, after release, it leaves little residue and is very easy to sweep up.
It is non-conductive and very friendly to power distribution equipment.
DIY to install, just only need a small bracket and several small screws to install, or just use several small magnets together with a 3M brand of glue to install it.
Environmentally friendly, won't damage the ecosystem.
Instantaneous fire extinguishing takes only a few seconds to extinguish the fire.
