The thermal sensing type aerosol generator is an automatic fire extinguishing system, which can be applied in the switchgear.
Some people wonder why aerosol suppression devices can be used in distribution cabinets, to explain this, Let’s start with an introduction to switchgear.
A switchgear is a combination of electrical disconnect switches, fuses or circuit breakers used to control, protect, and isolate electrical equipment.
The switchgear is everywhere in the computer data center, data processing room, generator room, water-pumping room, electrical control room, and power supply room.
It is very important to use a feasible fire extinguishing generator in switchgear, and a 100-gram capacity of our aerosol fire extinguishing system is a solution.
The basic details are listed below:
Item Number: 200TH.
Outer Dimension: Φ101*125 millimeters.
Covering Area: about 2 cubic meters.
Mass of Aerosol Extinguishing Compound: 0.2 kilograms.
Design Dosage: 200 grams per cubic meter.
Starting Mode: thermal cord activation, activation temperature at 175℃ or 300℃.
Thermal Cord Color: Blue color for 175℃, and Red color for 300℃.
Fire Suppression Time: within 15 seconds.
Operating Temperature: -40 to +108℃.
Outlet Temperature: Less than 200 degrees Celsius.
The Lifetime of the Aerosol Fire Extinguishing Device: 10 more years.
Fire Suppression Type: Class A, B, C, E, F.
Activation Mode: Automatic by thermal sensing, or in other words, by thermal temperature sensing.
Thermal wire is an automatic fire detection device, so it can automatically activate the fire extinguishing system without any manual intervention.
To protect switchgear against fire, only thermal cord automatic fire extinguishing systems are sufficient.
Of course, if you need to link with the alarm system, then you have to choose the electrical type units.
The key features of this product are listed in the following:
Easy to install in the switchgear.
The aerosol compound is a clean extinguishing agent, it causes little residue after release and does not have any bad damage to the electrical cabinet and switchgear.
The shell of the device is with 304 stainless steel cylinder, so it is anti-moist.
This aerosol fire extinguisher is waterproof and we have get IP67 test report for it, so this means this product can be installed in any terrible environment.
It is small and could be able to install in any narrow space.
It can suppress switchgear fire rapidly in a few seconds.
Low cost in maintenance.
Designed to self-activate when the ambient temperature reaches its rated activation temperature at 175℃ or 300℃.
The life shelf is 10 years.
It not only applies in switchgear but also apply in the following fields:
Distribution cabinet.
Capacitor cabinet.
Socket box.
Kilowatt-hour meter box.
Transformer.
and for the following relative places:
High-tension and low-tension rooms.
Transformer rooms.
Control rooms.
Battery rooms.
Diesel generator rooms.
Condenser rooms.
Battery-charging rooms.
Substations.
Power plant.
Petrochemical industry.
Metallurgy industry.
High-rise Building.
200-gram thermal cord aerosol fire extinguishing system AW-QH-200TH, with a capacity to suppress fire in one cubic meter in an enclosed space.
The thermal cord plays a role in fire detection, after it senses there is a fire that starts from the switchgear, the aerosol extinguishing device will start to release an aerosol agent, and within a few seconds, the fire will be extinguished.
Enquiry Form ( we will get back you as soon as possible )
