Petrochemical plants and their systems are always at high risk of fire, and we can use ultra-fine particle dry chemical Fire Suppression Generators as a fire prevention solution for such kinds of plants.
As a rule, aerosol devices protect small objects and dry powders protect large protective areas.
In some China domestic and overseas projects we always install some dry chemical fire suppression generators in some petrochemical plants.
Because the Petrochemical Plants are always large rooms and very complex in their systems, in a petrochemical plant perhaps there are power distribution systems, power generator systems, cable tunnel systems, computer systems, and electrical cabinets.
Therefore, in chemical plants, we install both small aerosol fire extinguishers and automatic dry chemical fire suppression facilities. Aerosols are used to protect small electrical equipment and dry powders are used to protect real factory areas.
The petrochemical plants are very prone to fires and explosions, so dry powder systems play a very critical role in protecting chemical plants.
The dry powder ejected from the fire extinguishing device can be evenly spread to the whole protection area, which can efficiently protect the safety of the chemical plant.
Let’s go over the parameters of this amazing product, using the 5kg as an example.
Technical Data of the Dry Chemical Fire Suppression Generator
Model Number: FZX-ACT5/1.2 Pressurized Type.
Extinguishing Ability: 38 m3.
Actuator Type: Electrically 3 to 24 Volts and Thermally.
The thermal start function of this unit has several temperatures to choose from, they are 57℃, 68℃, 79℃, and 93℃. Usually, people prefer 68 and 79 degrees.
Cold areas will generally use lower action temperatures, while warm areas will generally use higher action temperatures.
This super-fine dry Chemical fire suppression generator FZX-ACT5/1.2 has the following advantages and features:
The spraying of ultrafine dry powder is relatively uniform and can effectively extinguish flames.
It can be applied to high-temperature and humid environments and is very flexible.
Ultra-fine fire extinguishing agents have small particle size, good fluidity, good resistance to re-ignition, and electrical insulation properties.
It can be used alone or in combination with multiple devices to form a non-pipe network fire extinguishing system.
This product has multiple starting methods, electric starting and hot starting.
The application range of ultra-fine dry powder fire extinguishing devices is wide, and they are suitable for various types of fires, such as common industries such as petroleum, chemical, electronics, printing, wood, etc.
Compared to other types of fire suppression systems, the biggest advantage of ultra-fine dry powder fire extinguishing systems is that they can be installed in open protected areas. The following are its application ranges:
Petrochemical plant.
Oil depot.
Shipping Terminal.
Power plant.
Underground Garage.
Airport.
Subway and stations.
Gymnasium.
Convention Center.
The Cinema.
Shopping arcade.
Archives.
Cable Tunnel.
Pump station.
Underground Pipe Gallery.
Computer room.
Please note the following when debugging, installing, and repairing the ultrafine dry powder fire extinguishing system:
Please hire professional technicians or installers to carry out the work, and wear gloves and masks during the operation.
During installation, operators should not smoke to prevent ignition of the hot start components of the fire extinguishing device.
Except for operators, all unrelated personnel are prohibited from entering the installation and commissioning site.
Before installation and debugging, please check the product list, read the operating manual, and understand the precautions that need to be taken.
Enquiry Form ( we will get back you as soon as possible )
