The aerosol-type fixed fire extinguishing system produces a super-fine aerosol compound, which is a clean agent without damage to electrical equipment.
Aerosol systems can be used for protecting the telecommunication rooms where high-value equipment is over there.
The electric start aerosol-based fixed fire extinguishing systems are ideal for protecting the telecommunication room.
In a telecommunication room, there are many electrical equipment over there: power supplies, signal transceivers, SDH transmission equipment, base station equipment, power distribution box, Environment monitor, Optical distribution frame, Digital distribution frame, Wireless devices, Access devices, and Switching equipment.
The telecommunication room and all the devices in the room should be protected by a suitable automatic fire suppression system, and the electrical activation of aerosol-type fixed fire extinguishing systems will be the best solution.
Firstly, we can install the large-size electric start aerosol generator in the telecommunication room, to protect the entire telecommunications room.
Secondly, we can install small-sized thermally and electrical aerosol extinguishers in the electrical cabinets and devices which are in this room.
In short, the entire telecoms equipment room and ancillary installations can be protected with aerosols.
We take a 1500g extinguishing agent electrically activated aerosol device as an example, to list the main performance indicators of this product.
Basic Technical Parameters of Electric start aerosol-based fixed fire extinguishing systems
The following are the basic parameters:
Name: Fixed Aerosol fire extinguisher.
Product Model: AW-QH-1500E
Capacity: 1500 aerosol covering up to 15 cubic meters.
Relative Humidity: up to 95% at a temperature of 20℃.
The Cylinder’s Surface Temperature: is less than 100℃.
Cylinder’s Nozzle Temperature: less than 200℃.
The Life span of an Aerosol Agent: is 10 years.
The aerosol chemical fixed fire extinguishing systems are clean and not corrosive to electronic equipment in telecom rooms, which is why aerosols can be used to protect all types of power distribution facilities.
There are 2 Safeguards in the aerosol solution for the telecommunication room, listed as follows:
Safeguard one: Installation of large aerosols for overall protection of telecommunication rooms, e.g. model AW-QH-1500E.
Safeguard two: Installation of small aerosols to protect individual switchboards, e.g. model AW-QH-30E/TH or AW-QH-60E/TH.
Every product is unique, and so are aerosols. Here are the strengths of aerosol fire suppression systems:
Highly effective based on its design density of 100 grams per cubic meter.
Environmentally friendly to the human body and animals.
Compact and weight save, it could be installed on the wall or the ceiling.
Its service life is long, almost 10 years.
The shell material is 304 stainless steel, making it durable.
It is waterproof and dustproof, Ingress Protection grade is IP67.
It is a DIY installation product, which is easy to install.
International certificates and approvals to support.
It is widely applied in the below fields but is not limited to:
Battery energy storage and battery room.
Server room.
IT computer room.
Transformer room.
data processing room.
Chemical storage room.
Elevator machine room.
Vehicle engine bays.
Gas turbine enclosures.
Lifting and handling equipment.
Marine engine room.
Pump houses.
Elevator rooms.
Gen-set or generator set.
Big capacity power inverter.
EV charging system.
Control panels.
This product is operated automatically, and normally works with Correspondingfire alarm systems together to fulfill its function of automatic operation:
Fire alarm panel.
Manual call point.
Heat detector.
Smoke detector.
Flame detector.
Start button.
Flash lamp visual alarm.
Gas release indicator.
Aspirating smoke detection system.
Liner heat detection.
Activation device.
Power supply unit c/w backup battery.
Fireproof cable.
Enquiry Form ( we will get back you as soon as possible )