La sala de distribución de energía, Sala de generación de energía, Subestación de control, and Substations are places where easy to catch fire, because a lot of electrical cabinets and control panels are over there, it is necessary to have an aerosol extinguishing system installed in these fire-prone areas.
You can have complete confidence in our min aerosol fire protection system Because it adopts innovative nano suppression technology and has now been widely applied in many industries, such as the transportation industry, industria marina, oil and gas industry, Industria minera, industria manufacturera, industria de aviación, nueva industria energética, etc..
We have many international cases of its application insalas de distribución de energíaand corresponding electrical cabinets.
Here we recommend a 750 grams electrically activated aerosol fire protection system, its basic technical data are as follows:
Modelo: 750mi (AW-QH-750E)
Product Measurement: 167 mm de diámetro, y 204 mm de altura.
Volumen de extinción: 7.5 metros cubicos.
Tiempo de supresión de incendios: 14 a 15 segundos.
Weight of Aerosol Fire Extinguishing Agent: 750 gramos.
Starting Method: La activación eléctrica, electrónica, suministro de energía eléctrica, corriente continua 3-24 voltios, y aire acondicionado 3-220 voltios.
The Aerosol Agent Color is brown.
Cylinder Color and Material: 304 acero inoxidable con color blanco plateado.
Weight of the Fire Extinguishing Generator: 5400 gramos.
Product Lifetime: 10 a 15 años.
Fire Extinguishing Ability Class: Clase A, Clase B, Clase C, Clase E y Clase F.
When installing this product in a power distribution room, please have the installer wear anti-static clothing to avoid the product being activated by static electricity.
además, be sure to install the product without power on!
Please use the correct wiring method. Para más detalles, por favor refiérase a nuestro installation guide.
Because all distribution rooms have electrical cabinets or control cabinets, we recommend installing an aerosol fire protection system on these electrical cabinets. The suitable model is a150-gram thermally activated aerosol extinguisher.
This product has many special features:
The power distribution room normally is not able to install agran sistema de extinción de incendios, like an FM200 system, Sistema Novec1230, or foam system, while a mini aerosol system is an alternative.
Hay muchos armarios eléctricos o paneles de control en una sala de distribución de energía., so aerosol cannot only be installed inside the room but also can be installed in the cabinet.
Aerosol is a clean agent, after release, it leaves little residue and is very easy to sweep up.
It is non-conductive and very friendly to power distribution equipment.
DIY para instalar, just only need a small bracket and several small screws to install, or just use several small magnets together with a 3M brand of glue to install it.
Amigable con el medio ambiente, won't damage the ecosystem.
Instantaneous fire extinguishing takes only a few seconds to extinguish the fire.