Aerosol Generator is a gas-alternative pipeless IT room fire suppression system, because aerosol fire extinguisher not only be able to apply in the whole IT room, but also can be installed inside the electrical cabinets as direct-to-source application.
In a IT room, many electric cabinets over there, then we can install each cabinets with one units of aerosol extinguisher, por ejemplo, one cabinets with vomume of 1.5 cubic meter will require a 150 grams of aeosol generator setted inside, with an automatic activation.
Más, we also need to install larger aerosols in the whole IT room. The generally recommended models are 2500g or 3000g.
The usual situation is that small aerosols protect small spaces and large aerosols protect large spaces.
Regardless of the type of aerosol device, their basic parameters are the same, below we list the basic parameters of the aerosol(Minisol).
Technical Specifications
tipo de producto: IT Room Fire Suppression System.
Fórmula: Strontium and Potassium aerosol.
Tipo de activación: eléctrico, thermal, or electric + thermal.
Firefighting Flooding Time: dentro 60 segundos.
Extinguishing efficiency: 0 a 30 cubic metres.
Voltage requirement: 3-24V.
Current requirement: roughly 500 mA.
Resistance Value Range: 1.0-2.0ay.
Product temperature upper limit: less than or equal to 200 ℃.
Shell and inner tube material: 304 acero inoxidable.
Vida del producto: 10 a 15 años (depending on ambient temperature and humidity).
Temperatura ambiente: -40℃ hasta + 95 ℃.
Humedad relativa: 95 percent relative.
Supportted Certificates: CE, ROHS, GL, IP67 and ISO series.
A number of other types of extinguishing devices can also be used as IT ROOM fire suppression systems, but we believe that the simplest and most practical are aerosols, which have excellent performance indicators in all aspects.
If you have an IT ROOM and need to install a fire suppression system, we recommend the aerosol system to you.
Formulario de Consulta ( vamos a ayudarle a volver tan pronto como sea posible )
