The automatic sticker device fire aerosol is a fire extinguisher that automatically detects fires and automatically starts to extinguish them.
It has its own heat-sensing wires, which can sensitively catch the fire and react at the first time.
It is mainly used in small enclosed spaces, such as the power distribution cabinets you often see, new energy battery boxes, a variety of transport vehicles and so on.
Its best feature is the extremely simple installation method. It has 3M brand double-sided tape on the bottom, so as long as you stick it to the surface of the installation object, you can finish the installation work.

On both sides of the product there are several evenly sized nozzles from which the aerosol fire extinguishing agent is sprayed.
The fire extinguishing agent which ejected from the nozzles can quickly flood the limited space to achieve the purpose of fire extinguishing.
In all, it is a fullly automatic fire extinguishing device that requires no human intervention.
Parameters and Index of the Automatic Fire Aerosol Sticker Device
Its parameters and indices are as follows:
- tootenimi: Automatic Fire Aerosol Sticker.
- Mudel: QRR0.03G/S/ST-G1.
- Aerosol Compound Agent: 30 grammi.
- Katteala: 0.3 kuupmeetrit.
- Compound Type: Strontium and Potassium 60% juurde 70%.
- Coolant: Cooling chemicals.
- Mõõtmed: 90*60*27.5 mm.
- Item Weight: 0.2 kilogrammi.
- Kesta materjal: Fire Resistant PVC.
- Fire Sensing Temperature: 170 °C.
- Sensing Cable Type: Thermal Cord Cable.
- Toote värv: Must, red and other.
- Mounting: Screw Mounting and 3M adhesive.
- Düüsi temperatuur: <200 ℃.
- Life-Cycle: Over ten years.
- Standard: XF499.1-2010, UL2775, ISO15779, KIWA.
- Ümbritsev temperatuur: -50℃ kuni +95 ℃.
- Päritolukoht: Hiina.
For ordinary closed space, ulatub selle tulekustutusvõimeni 0.3 kuupmeetrit; for lithium battery boxes, new energy replacement cabinets and other spaces involve in Class D fire, its fire extinguishing capacity of about 0.06 kuupmeetrit.
So when you buy this fire aerosol device sticker extinguisher, please consult our sales, after-sales or technical staff first.

The main application of this product as following:
- Külmik
- Electrical Panel.
- Compactor.
- Car Engine.
- Bank Safes.
- Inside the electric switch box.
- Communication room cabinets.
- Filing cabinet.
- Lülituskapp.
- Lithium battery compartment.
- Battery-powered vehicle.
- Ring Main Cabinet.
- Energiasalvestuskapp.
- Jaotusseadmed.
- Communications base stations.
Tulevikus, as technology advances and develops, more and more unknown spaces will need the protection of this automatic fire aerosol sticker.
When operating and using the product, please consult the precautions first, this product has the following precautions:
- You must read the technical specification sheet carefully before using and installation. Installers must be standardised, and appropriate protective measures need to be prepared during installation.
- Do not point the nozzle of the fire extinguishing device at people during installation.
- Paigaldamise ajal, hooldus, inspection and repair, it is important to ensure that the wiring is not short-circuited.
Short-circuiting of the wiring will probably result in equipment failure or incorrect start-up.
- When the fire extinguishing device is not sprayed, make sure that the protective plugs or sealing foils of the nozzles are not broken to ensure that the product is intact.
- Ensure that there are no obstructions within a distance of 200mm directly in front of the unit's nozzle. And the unit is not suitable for installation downwind of the protected space.
- This device is not suitable for installation in places that are susceptible to wind and rain, or where there is a high degree of acidity.
- After spraying and discharging, the temperature of this product's case is very high (ultra-high temperature), wait 30 minutes before moving it.