The aerosol-type fixed fire extinguishing system produces a super-fine aerosol compound, which is a clean agent without damage to electrical equipment.
Aerosol systems can be used for protecting the telecommunication rooms where high-value equipment is over there.
Telekommunikatsiooniruumis, seal on palju elektriseadmeid: toiteallikad, signaali transiiverid, SDH edastusseadmed, tugijaama varustus, toitejaotuskast, Keskkonna jälgija, Optiline jaotusraam, Digitaalne jaotusraam, Juhtmeta seadmed, Juurdepääs seadmetele, ja lülitusseadmed.
The telecommunication room and all the devices in the room should be protected by a suitable automatic fire suppression system, and the electrical activation of aerosol-type fixed fire extinguishing systems will be the best solution.
Esiteks, we can install the large-size electric start aerosol generator in the telecommunication room, to protect the entire telecommunications room.
Teiseks, we can install small-sized thermally and electrical aerosol extinguishers in the electrical cabinets and devices which are in this room.
Lühidalt, the entire telecoms equipment room and ancillary installations can be protected with aerosols.
We take a 1500g extinguishing agent electrically activated aerosol device as an example, to list the main performance indicators of this product.
Basic Technical Parameters of Electric start aerosol-based fixed fire extinguishing systems
The following are the basic parameters:
Nimi: Fixed Aerosol fire extinguisher.
Tootemudel: AW-QH-1500E
Mahutavus: 1500 aerosoolkattega kuni 15 kuupmeetrit.
Suhteline niiskus: kuni 95% at a temperature of 20℃.
The Cylinder’s Surface Temperature: is less than 100℃.
Cylinder’s Nozzle Temperature: alla 200 ℃.
The Life span of an Aerosol Agent: on 10 aastat.
The aerosol chemical fixed fire extinguishing systems are clean and not corrosive to electronic equipment in telecom rooms, which is why aerosols can be used to protect all types of power distribution facilities.
Seal on 2 Safeguards in the aerosol solution for the telecommunication room, listed as follows:
Safeguard one: Installation of large aerosols for overall protection of telecommunication rooms, nt. model AW-QH-1500E.
Safeguard two: Installation of small aerosols to protect individual switchboards, nt. model AW-QH-30E/TH or AW-QH-60E/TH.