La salle de distribution électrique, Salle de production d'électricité, Appareillage, and Substations are places where easy to catch fire, because a lot of electrical cabinets and control panels are over there, it is necessary to have an aerosol extinguishing system installed in these fire-prone areas.
You can have complete confidence in our min aerosol fire protection system Because it adopts innovative nano suppression technology and has now been widely applied in many industries, such as the transportation industry, industrie maritime, oil and gas industry, industrie minière, industrie manufacturière, industrie aéro-nautique, nouvelle industrie de l'énergie, etc.
We have many international cases of its application insalles de distribution d'énergieand corresponding electrical cabinets.
Here we recommend a 750 grams electrically activated aerosol fire protection system, its basic technical data are as follows:
Modèle: 750E (AW-QH-750E)
Product Measurement: 167 mm de diamètre, et 204 mm de hauteur.
Volume d'extinction: 7.5 mètres cubes.
Temps d'extinction d'incendie: 14 à 15 secondes.
Weight of Aerosol Fire Extinguishing Agent: 750 grammes.
Starting Method: activation électrique, électronique, alimentation électrique, DC 3-24 volts, et CA 3-220 volts.
The Aerosol Agent Color is brown.
Cylinder Color and Material: 304 acier inoxydable de couleur blanc argenté.
Weight of the Fire Extinguishing Generator: 5400 grammes.
Durée de vie du produit: 10 à 15 années.
Fire Extinguishing Ability Class: Classe A, classe B, classe C, Classe E et classe F.
When installing this product in a power distribution room, please have the installer wear anti-static clothing to avoid the product being activated by static electricity.
en outre, be sure to install the product without power on!
Please use the correct wiring method. Pour plus de détails, veuillez vous référer à notre installation guide.
Because all distribution rooms have electrical cabinets or control cabinets, we recommend installing an aerosol fire protection system on these electrical cabinets. The suitable model is a150-gram thermally activated aerosol extinguisher.
This product has many special features:
The power distribution room normally is not able to install agrand système d'extinction d'incendie, like an FM200 system, Système Novec1230, or foam system, while a mini aerosol system is an alternative.
Il existe de nombreuses armoires électriques ou panneaux de contrôle dans une salle de distribution électrique, so aerosol cannot only be installed inside the room but also can be installed in the cabinet.
Aerosol is a clean agent, après la libération, it leaves little residue and is very easy to sweep up.
It is non-conductive and very friendly to power distribution equipment.
Bricolage à installer, just only need a small bracket and several small screws to install, or just use several small magnets together with a 3M brand of glue to install it.
Écologique, won't damage the ecosystem.
Instantaneous fire extinguishing takes only a few seconds to extinguish the fire.
