FM200 Direct Type Fire Detecting Tube Systems is perfect for fire detecting, brandalarm, and fire extinguishing, working without an outer power supply; » FM200 Direct Type branddetectiebuissystemen, » FM200 Direct Type branddetectiebuissystemen.
FM200 direct-type fire detecting tube systems use HFC-227ea gas the extinguishing agent and a red 6mm diameter fire detection tube as the medium for conveying the extinguishing agent.
This fire extinguishing system is generally used for fire prevention and control of vehicles, verdeelkasten, and mechanical equipment.
The process of making this product is relatively complex:
ten eerste, it is necessary to make the steel cylinder clear and clean and use specialized equipment to check the airtightness and water pressure tests of the instruments to ensure that there is no risk of leakage in the steel cylinder.
Inspect container valves and other accessories and assemble them.
Use specialized gas tank filling equipment to fill the FM200 gas fire extinguishing agent into the steel cylinder.
Use specialized nitrogen pressurization equipment to fill nitrogen into the steel cylinder.
Further, conduct airtightness and water pressure tests on the steel cylinder to ensure that there is no leakage of the product.
Pack and ship.
During the product assembly process, it is difficult to install the red fire detection tube, so it is required that the installation personnel have good technical skills and always maintain safety awareness.
Parameters of FM200 Direct Type Fire Detecting Tube Systems
Hereby we would like to recommend the direct type of fm200 fire-detecting tube system as following parameters:
Item nummer.: WZ-Q/T-3Q en WZ-Q/T-6Q.
Type blusapparaat: direct.
Type brandblusmiddel: HFC-227ea, FK 5-1-12
Gewicht van brandbestrijdingsmiddel: 3± 5% kilogram en 6 ± 5% kilogram.
Nominale werkdruk: 2.5 MPa.
Maximale werkdruk: 4.2 MPa.
Omgevingstemperatuur: -10 tot 50℃.
Minimale agentkwaliteit per volume: 0.7 kilogram per kubieke meter.
Maximale lengte van branddetectiebuis: 25 meter.
Components and installation materials: fittings, connectors, beugels.
Other optional components: alarm controller, drukschakelaar, signal device, manual actuator, backup power supply, enzovoort.
Installation Accessories: C trip.
Kleur: Rood geverfd.
It doesn't need a power supply, rookmelder, or heat detector, and works without the complex pipeline.
use its pressure reservoir, using a pressurized tube and a bottle. » FM200 Direct Type branddetectiebuissystemen, detect and extinguish a fire at its early stage.
» FM200 Direct Type branddetectiebuissystemen.
» FM200 Direct Type branddetectiebuissystemen, goedkoop, » FM200 Direct Type branddetectiebuissystemen.
Eenvoudig en gemakkelijk te installeren.
» FM200 Direct Type branddetectiebuissystemen kleurloos, smaakloos, ODP = 0, ALT=0, GWP = 0.
» FM200 Direct Type branddetectiebuissystemen, Niet corrosief, nietgeleidend, geen residu na het vrijgeven.
» FM200 Direct Type branddetectiebuissystemen.
» FM200 Direct Type branddetectiebuissystemen.
» FM200 Direct Type branddetectiebuissystemen.
» FM200 Direct Type branddetectiebuissystemen.
» FM200 Direct Type branddetectiebuissystemen.
Program-controlled exchange room in the communication system.
» FM200 Direct Type branddetectiebuissystemen.
Controlekamer voor elektriciteitscentrales.
Controlekamer voor elektriciteitscentrales.
Computer Kamer.
Controlekamer voor elektriciteitscentrales.
Controlekamer voor elektriciteitscentrales.
Kabel goed, kabeltunnel, Controlekamer voor elektriciteitscentrales.
Controlekamer voor elektriciteitscentrales.
Controlekamer voor elektriciteitscentrales.
Controlekamer voor elektriciteitscentrales, Controlekamer voor elektriciteitscentrales, or fire trace system, is an easy and simple fire suppression system that uses hfc-227ea or co2 gas as a fire extinguishing agent, it is a gas fire suppression system halon-alternative product.
Fire detecting tube system is very suitable for installation inelektrisch kasten.
Aanvraagformulier ( we zullen terug te krijgen u zo spoedig mogelijk )
