Do all for safety,for a safe world!

Photovoltaic Inverter Fire Extinguisher

» Products » Lithium Battery Fire Prevention System » Photovoltaic Inverter Fire Extinguisher

Photovoltaic Inverter Fire Extinguisher

CATEGORY AND TAGS:
Lithium Battery Fire Prevention System, Products

Photovoltaic Inverter Fire Extinguisher -Highly effective aerosol fire extinguishing agent specially designed for the PV inverter and solar panel systems.

40 grams extinguishing compound is filled inside the aerosol cylinder, to cover a volume of 0.4 cubic meters of inverter enclosure.

enquiry

Specifications
Key Features
Key Applications
Points for Attention

The photovoltaic inverter fire extinguisher is a fire extinguisher with 40 grams of fire extinguishing agent and a size of 106*102*15mm, we also call it an ultra-thin fire extinguisher.

This product is mainly installed in PV inverters and PV modules with 4 small screws and can also be reinforced with double-sided tape.

To distinguish it from the other components of the PV module, the body of the photovoltaic inverter fire extinguisher was painted red by our workers so that it could be seen at a glance that it was an automated fire extinguisher.

In addition, the side of the product is also full of spray holes, so the fire extinguishing agent can be quickly and evenly released from these holes or nozzles, efficiently and quickly put out the fire.

What’s more, it has a variety of starting methods, including thermal start, electric start, and NO normal open/NC normal closed feedback. Ensure successful fire suppression and a high degree of system integration.

This product is mainly used in the field of new energy photovoltaic, here we highlight its main performance and indicators.

Red Renewable Energy Fire Extinguisher

Performance and Data of the Photovoltaic Inverter Fire Extinguisher

Name of Product: 40G PV Inverter Fire Extinguisher.
Chemical Content: Aerosol Agent with strontium and potassium nitrate.
Model of Product: QRR0.04G/S/SA-F2.
Cover Ability: 0.4 cubic meters of enclosed space.
Extinguishing Time: Less than 8 Seconds.
Dimension: 106*102*15mm.
Cylinder Color: Red painted.
Nozzles: Side (All 4 sides).
Trigger Mode: Electric and Thermal 175℃.
Pressure Switch Function: Optional N/O to N/C, or N/C to N/O.
Installation Modes: 3M double-coated tissue tape, or M4 Screws.
Ambient Temperature: -50℃ to +95℃.
Storage Temperature: -40℃ to +50℃.
Life Cycle of the Product: 10 Years.
Executive Standard: GA499.1-2010, NFPA2010, UL2775, ISO15779.

Do not touch the cylinder after releasing it. because it is super-hot, and maybe will burn and hurt you.

This product is special for PV inverters, but it also can be applied in some other enclosed spaces, such as electrical panels, energy storage cabinets, etc.

For more details feel free to read its operational manual and other documents.

Solar Panel Fire Extinguisher

This Photovoltaic Inverter Fire Extinguishing Device has the following key features and advantages:

Dual-activation, there are two activation modes, one is a thermal cord of 175℃, and another is an electric power supply of 3 to 24 volts. this will ensure a 100 percent probability of activation.
flattened design, This is a user-friendly design that allows the product to be better mounted in inverters and other PV modules, as well as in various other types of cabinets.
It has the longest service life compared to conventional firefighting equipment, as the service life can be between 10 and 15 years.
The extinguishing agent is a mixture of strontium nitrate and potassium nitrate, which is both environmentally friendly and efficient.
The product can be equipped with an optional feedback function and can communicate with the controller CAN bus and RS485.
There are many places where this product can be installed, such as photovoltaic inverters, energy storage cabinets, power cabinets, and so on.

The Solar PV Inverter automatic extinguisher equipment mainly has the following key applications:

Although this product is pressure-free and not dangerous, there are some precautions as follows:

Store at a suitable temperature, not lower than -40 degrees Celsius and not higher than 50 degrees Celsius. Store in a ventilated and dry place.
After start-up, the housing will heat up to 200 degrees Celsius, so do not touch the housing after start-up and wait for it to cool down before handling it.
Do not connect the power supply during installation, and do not smoke or work with open flame during installation.
Keep out of reach of children and do not give them to play with.
For other precautions, please refer to the instructions.