Pressurized ABC Ultra-fine Fire Extinguisher Device for protecting the underground parking lots, underground pipe gallery, workshops, and logistic warehouses.
3kgs of this product can suppress a volume of twenty-three cubic meters, which is cost-effective and highly efficient.
Pressurized ABC Ultra-fine Fire Extinguisher Device is a simple and efficient total flooding system because simple and efficient total flooding system because they are simple to activate and install.
In terms of starting methods, it is a simple hot start and an electric start. Hot start uses a 68-degree glass bulb; electric start is an external 3 to 24-volt power supply.
For installation, just use O-hooks to hang it on the ceiling or the inside of the wall, just like hanging red lanterns.
Whether the protected area is large or small, it is possible to install this Ultra-fine Fire Extinguisher Device, especially for the protection of small rooms, which are usually protected by using several fire extinguishing devices and connecting them to the control system.
In addition, the product can be connected to the signal feedback function, with RS485/CAN system, or fire extinguishing controller to communicate with each other.
Below we highlight the model FZX-ACT3/1.2.
Technical Data of Ultra-fine ABC Dry Chemical Fire Extinguisher Device
Start-up Mode: electronics power supply, voltage at AC 3 to 220 volts, and DC 3 to 24 volts.
Working Mode: Work stand-alone, or connect with fire alarm systems.
Recommended Model Number: FZX-ACT3/1.2.
Protection Volume: 23m3.
Main Agent Powder: Super-fine ABC dry chemical.
Filling Weight: 3000+150 grams.
Device Diameter: 28.3 centimeters.
Device Height: 30 centimeters.
Coverage Volume: ≤30 cubic meters.
Operating Ambient Temperature Range: from -40℃ to +50℃.
Relative Humidity: maximum 95%.
Extinguishing Residual Rate: maximum 5%.
Nitrogen Gas Pressure: 1.2 MPa under 20℃. (or 1.5 Mpa).
This 3kgs super-fine ABC dry powder extinguishing equipment can cover a volume of 23m3 because it is design density is 130 grams per cubic meter for room protection. This firefighting space and capability are excellent.
The dry powder fire extinguishing system is both a total flooding system and a local fire protection system, and the enclosure of the installation site will not affect its installation.
Pressurized ABC ultra-fine fire extinguisher devices can be applied to underground parking lots, largely due to their following characteristics:
The product has good sealing performance and can be used in underground environments with high temperatures and humidity.
The product itself has a small size and won't take up too much underground space.
It is installed on the ceiling or wall, which is very space-saving.
It can be dispersed in areas where underground parking lots are more prone to fires.
The underground garage is not very enclosed, and the suspended ultra-fine dry powder fire extinguishing system can be used for local firefighting.
This product is not only suitable for car garages and underground parking lots but can also be installed in the following areas:
