A fábrica ou oficina, Sala de Geração de Energia, Comutador, and Substations are places where easy to catch fire, because a lot of electrical cabinets and control panels are over there, it is necessary to have an aerosol extinguishing system installed in these fire-prone areas.
You can have complete confidence in our min aerosol fire protection system Because it adopts innovative nano suppression technology and has now been widely applied in many industries, such as the transportation industry, indústria naval, oil and gas industry, industria de mineração, indústria de transformação, indústria da aviação, indústria de energia nova, etc.
We have many international cases of its application insalas de distribuição de energiaand corresponding electrical cabinets.
Here we recommend a 750 grams electrically activated aerosol fire protection system, its basic technical data are as follows:
Modelo: 750E (AW-QH-750E)
Product Measurement: 167 mm de diâmetro, e 204 mm de altura.
extinção de Volume: 7.5 metros cúbicos.
Fogo de supressão Tempo: 14 para 15 segundos.
Weight of Aerosol Fire Extinguishing Agent: 750 gramas.
Starting Method: A activação eléctrica, eletrônicos, fonte de energia elétrica, DC 3-24 volts, e CA 3-220 volts.
The Aerosol Agent Color is brown.
Cylinder Color and Material: 304 aço inoxidável com cor branco prateado.
Weight of the Fire Extinguishing Generator: 5400 gramas.
Product Lifetime: 10 para 15 anos.
Fire Extinguishing Ability Class: Classe A, classe B, classe C, Classe E e Classe F.
When installing this product in a power distribution room, please have the installer wear anti-static clothing to avoid the product being activated by static electricity.
além disso, be sure to install the product without power on!
Please use the correct wiring method. Para mais detalhes, por favor, consulte o nosso installation guide.
Because all distribution rooms have electrical cabinets or control cabinets, we recommend installing an aerosol fire protection system on these electrical cabinets. The suitable model is a150-gram thermally activated aerosol extinguisher.
This product has many special features:
The power distribution room normally is not able to install agrande sistema de supressão de incêndio, like an FM200 system, Sistema Novec1230, or foam system, while a mini aerosol system is an alternative.
Existem muitos gabinetes elétricos ou painéis de controle em uma sala de distribuição de energia, so aerosol cannot only be installed inside the room but also can be installed in the cabinet.
Aerosol is a clean agent, after release, it leaves little residue and is very easy to sweep up.
It is non-conductive and very friendly to power distribution equipment.
Faça você mesmo para instalar, just only need a small bracket and several small screws to install, or just use several small magnets together with a 3M brand of glue to install it.
Ambientalmente amigável, won't damage the ecosystem.
Instantaneous fire extinguishing takes only a few seconds to extinguish the fire.