Aerosol Suppression Device is a Smart Vehicle Fire Protection
» Vår blogg» Aerosol Suppression Device is a Smart Vehicle Fire Protection
Aerosol Suppression Device is a Smart Vehicle Fire Protection
december 23, 2017
WHY NEED VEHICLE FIRE PROTECTION?
The safety of passengers and operator of vehicles is the most important factor when we consider choosing a reasonable fire protection device, as the danger of vehicle fire is constant because all vehicles carry a combination of highly combustible fluids including fuel, oil, smörjmedel, hydraulic fluid, grease and ignition elements including electrical circuits, batterier, exhaust manifolds and so on.
So it is very in need of a reasonable fire suppression systems for vehicle fire protection.
WHAT IS THE MAIN CAUSE OF VEHICLE FIRE?
Normally the following is the main cause of vehicle fire not limited to:
Short Circuits that make electrical wires or cables broken and worn.
Turbocharger failure.
Vehicle Generator Failure.
The hydraulic system is leaking.
WHERE IN THE VEHICLE IS EASY TO CATCH FIRE?
Cargo Area.
Aviation GPU area.
Batteri
Particulate Trap Area.
Coolant Heater.
Vehicle Engine Room.
Hydraulic Pump Area.
AC Condenser Area.
Elskåp.
Ignition Generator Area.
Refrigeration Systems.
Fuel Filler and Tank Area.
MANY KINDS OF VEHICLES NEED FIRE PROTECTION SYSTEM
We have a Minisolaerosol Suppression Devicewhich is small, kompakt, and space-saving with high fire suppression ability, and it is very suitable to install anywhere in vehicle tools
And as the aerosol compound has the followingFEATURES:
Rapidly Suppression and Discharging Time.
Produce gas-like aerosol flooding fire hazard.
Non-Toxic.
Environmentally Friendly with ODP=0, ALT=0, GWP=0.
Increased effectiveness on a weight and volume basis.
Low Maintenance.
High-efficiency and space-saving.
Easy to install with bracket accompanying the device, and no piping network and no pressure.
Easy to sweep up after discharging, with no residue after extinguishing.
Non-Conductive.
Non Corrosive.
Do not harm the engine or sensitive electronic equipment.
10-15 years life span.
3 Activation Methods to support: Electrical, Thermal Cord, and Thermo Bulb. electrical activation is actuated by an electrical power supply at DC3-24V or AC3-220V; thermal cord activation is actuated by a thermal cord line with temperature or rated at 175℃ or 300℃, Thermo Bulb Activation is actuated by thermo bulb generator calledTADat the temperature of rated at 57℃, 68℃, 79℃, 93℃ and OEM design.