Güç dağıtım odası, Enerji Üretim Odası, Şalt, and Substations are places where easy to catch fire, because a lot of electrical cabinets and control panels are over there, it is necessary to have an aerosol extinguishing system installed in these fire-prone areas.
You can have complete confidence in our min aerosol fire protection system Because it adopts innovative nano suppression technology and has now been widely applied in many industries, such as the transportation industry, deniz endüstrisi, oil and gas industry, maden endüstrisi, üretim endüstrisi, Havacılık endüstrisi, yeni enerji endüstrisi, vb.
We have many international cases of its application ingüç dağıtım odalarıand corresponding electrical cabinets.
Here we recommend a 750 grams electrically activated aerosol fire protection system, its basic technical data are as follows:
modeli: 750E (AW-QH-750E)
Product Measurement: 167 mm çap, ve 204 yükseklik mm.
Söndürme Hacim: 7.5 metreküp.
Yangın Söndürme Zaman: 14 için 15 saniye.
Weight of Aerosol Fire Extinguishing Agent: 750 gram.
Starting Method: Elektrik aktivasyon, elektronik, Elektrik güç kaynağı, DC 3-24 volt, ve AC 3-220 volt.
The Aerosol Agent Color is brown.
Cylinder Color and Material: 304 stainless steel with silver-white color.
Weight of the Fire Extinguishing Generator: 5400 gram.
Ürün Ömrü: 10 için 15 yıl.
Fire Extinguishing Ability Class: A sınıfı, B Sınıfı, C Sınıfı, E Sınıfı ve F Sınıfı.
When installing this product in a power distribution room, please have the installer wear anti-static clothing to avoid the product being activated by static electricity.
ayrıca, be sure to install the product without power on!
Please use the correct wiring method. Daha fazla ayrıntı için, lütfen bizim installation guide.
Because all distribution rooms have electrical cabinets or control cabinets, we recommend installing an aerosol fire protection system on these electrical cabinets. The suitable model is a150-gram thermally activated aerosol extinguisher.
This product has many special features:
The power distribution room normally is not able to install abüyük yangın söndürme sistemi, like an FM200 system, Novec1230 sistemi, or foam system, while a mini aerosol system is an alternative.
Bir güç dağıtım odasında birçok elektrik kabini veya kontrol paneli vardır., so aerosol cannot only be installed inside the room but also can be installed in the cabinet.
Aerosol is a clean agent, after release, it leaves little residue and is very easy to sweep up.
It is non-conductive and very friendly to power distribution equipment.
yüklemek için DIY, just only need a small bracket and several small screws to install, or just use several small magnets together with a 3M brand of glue to install it.
Çevre dostu, won't damage the ecosystem.
Instantaneous fire extinguishing takes only a few seconds to extinguish the fire.
