Kategoriler
- Bizim blog (71)
- Teknoloji Desteği (18)
The extinguishing nozzles of Minisol are set in two locations, bir konum aerosol üretecinin alt kısmındadır, ve başka bir konum da aerosol cihazının üstündedir, normalde insanlar alttaki nozulu sever, but some special projects require a magnet with 3m glue to install, o zaman söndürme nozulu sadece aerosol jeneratörünün üstüne yerleştirilmelidir..
Normally if the extinguishing nozzles are set on the bottom of the aerosol, then use an installation bracket to install it if the extinguishing nozzles are set on the top of the aerosol, daha sonra yüklemek için mıknatısları 3M yapıştırıcı ile birlikte kullanın, but you also can choose to have installation bracket.
This is the best way to install aerosol cihazımız in many projects in the wind power room, jeneratör odası, mobil motor, and machines, normally people purchase our product we use an installation bracket, the advantage of using an installation bracket is the aerosol generators can be firmly anywhere, Kurulumdan sonra düşmesini önlemek için.
Yani söndürme memesi alttaysa, bu kurulum braketini daha iyi kullanın(vidalarla) yüklemek.
The installation bracket is made up of stainless steel iron and it is strong and anti-corrosion, by using it you do not worry about it getting corrosion.
Installation brackets include “U-shaped” ve “L-shaped” parantez, please see the photos showing:
Normally for a small size of minisol aerosol, use an “L” bir kurulum braketi şekillendirin, and for a medium or large size of minisol aerosol, then use a “sen” bir kurulum braketi şekillendirin.
This is the special way to install our aerosol generator in some projects that are not suitable to use the installation bracket to install, ancak mıknatıslarla kullanıma uygundur. 3M yapıştırıcı yüklemek.
3M tutkallı mıknatıslar kullanılarak aerosol cihazının söndürme memeleri üst tarafa yerleştirilmelidir., and the protection object must be with the material of iron or stainless steel so that the magnetic and 3M glue can be adhered to it.
The advantages of using magnets with 3M glue is also easy to install, but not as firmly installed as by using an installation bracket, so if not for special projects, then use an installation bracket, but for some special projects better to use magnets and 3M glue to install, o zaman bazı özel önerilerde bulunacağız.
Nowadays aerosol fire suppression device is recognized worldwide and many engineering and installation companies and firefighting enterprises think aerosol suppression is a good fire protection solution for them, so they like to design aerosol systems for their ongoing projects.
The following industries or fields are places that require a Minisol fire suppression device with different installation modes:
So industries and fields better use Brackets to install, and some better use magnets and 3M brand glue.
Hangi kurulum yöntemlerini kullanmak için önce bizden sorgulamanız daha iyi olur, and tell me some basic information about the following:
After we get your inquiry we will ask you for the basic information and then will require you to give us more information, aşağıdakilerden herhangi birini içeren bilgiler:
After that we will send an inquiry to our design department in the company and the technician will work out a fire solution for your project.
We are an efficiency-oriented manufacturing company and we design, üretmek, engineer, and install a variety of our fire suppression systems and their devices: aerosol, FM200, ig541, CO2, kuru kimyasal toz, ETİKET, vb.
We are an efficiency-oriented manufacturing company and we design, üretmek, engineer, and install a variety of fire suppression systems and their devices: aerosol, FM200, IG541, karbon dioksit, kuru kimyasal toz, ETİKET, ve bunun gibi.