Two More Ways to Install Minisol Aerosol Generators

Description of our Extinguishing nozzle on the Minisol aerosol generators

The extinguishing nozzles of Minisol are set in two locations, one location is on the bottom of the aerosol generator, and another location is on the top of the aerosol device, normally people like the nozzle on the bottom, but some special projects require a magnet with 3m glue to install, then the extinguishing nozzle should be set on the top of aerosol generator only.

Normally if the extinguishing nozzles are set on the bottom of the aerosol, then use an installation bracket to install it if the extinguishing nozzles are set on the top of the aerosol, then use magnets together with 3M glue to install, but you also can choose to have installation bracket.

The first way to install Minisol aerosol generators – By using of installation bracket and screws

This is the best way to install our aerosol device in many projects in the wind power room, generator room, mobile engine, and machines, normally people purchase our product we use an installation bracket, the advantage of using an installation bracket is the aerosol generators can be firmly anywhere, to avoid it from falling off after installation.

So if the extinguishing nozzle is on the bottom, better use this installation bracket(with screws) to install.

The installation bracket is made up of stainless steel iron and it is strong and anti-corrosion, by using it you do not worry about it getting corrosion.

Installation brackets include “U-shaped” and “L-shaped” brackets, please see the photos showing:

• Minisol aerosol generator -1
• Aviation plugs -2
• Cable/Wire -3
• Round hoop -4
• Bracket connectors 1 -5
• Bracket connectors 2 -6
• L shape installation bracket -7
• Flat pad -8
• Spring pad -9
• Hexagonal Screws -10
• U-shape installation bracket -11

Normally for a small size of minisol aerosol, use an “L” shape one installation bracket, and for a medium or large size of minisol aerosol, then use a “U” shape one installation bracket.

The second way to install Minisol aerosol generators is by using magnets with 3M glue

This is the special way to install our aerosol generator in some projects that are not suitable to use the installation bracket to install, but suitable to use magnets with 3M glue to install.

By using magnets with 3M glue to install the extinguishing nozzles of the aerosol device must be set on the top side, and the protection object must be with the material of iron or stainless steel so that the magnetic and 3M glue can be adhered to it.

The advantages of using magnets with 3M glue is also easy to install, but not as firmly installed as by using an installation bracket, so if not for special projects, then use an installation bracket, but for some special projects better to use magnets and 3M glue to install, then we will give some special suggest.

Nowadays aerosol fire suppression device is recognized worldwide and many engineering and installation companies and firefighting enterprises think aerosol suppression is a good fire protection solution for them, so they like to design aerosol systems for their ongoing projects.

Different Installation Modes

The following industries or fields are places that require a Minisol fire suppression device with different installation modes:

• Wind Power Industry, the wind turbine nacelle, control board, and electrical cabinets.
• Transportation Industry,  Bus, coaches, trucks, cars, and some other heavy-duty vehicles, for example, our car needs to install a fire suppression system, we suggest installing our aerosol suppressant generators inside the car engine, with the capacity of covering 1.5 to 2.5 cubic meters.
• Communication industry, in the communication industry there are many electrical equipment cabinets, control boards, and electronic boxes that need to be protected by a small fire suppression device, such as aerosol.
• Power Industry, The power industry includes wind power, power generators, power distribution, and many electrical cabinets are over there.
• In public places and municipal facilities, such as power distribution cabinets, tunnels, bridges, gas supplies, water supplies, and power supplies, the electronic equipment also may require a small aerosol fire suppression system to protect it.
• Offshore platform Industry, a transformer room in an offshore platform always needs such small fire suppression system to protect it, such as this aerosol.
• Battery Industry, Nowadays new energy is developing so fast, and people have great requirements for battery products, so now some companies have been researching to install a small fire suppression generator inside a battery space, and our aerosol devices can.
• Building Industry, a weak current and heavy current control room in buildings will possible to have an aerosol fire suppression device to make protection.
• Others, we can not be able to list all but we can imagine this small aerosol fire extinguishing device is be able to applied everywhere.

About Bracket Installation

So industries and fields better use Brackets to install, and some better use magnets and 3M brand glue.

To use which mode of installation methods you would better inquiry from us first, and tell me some basic information about the following:

• Project name, this is to know where to install the device.
• What function do you want, automatic, manual, or both of them?
• Installation Environment and ambient temperature required.

After we get your inquiry we will ask you for the basic information and then will require you to give us more information, the information including any of the following:

• Project drawings in DWG format or PDF or in JPG format.
• Project material requirement lists (Request for Quotation).
• Dimension and Specifications.

After that we will send an inquiry to our design department in the company and the technician will work out a fire solution for your project.

We are an efficiency-oriented manufacturing company and we design, produce, engineer, and install a variety of our fire suppression systems and their devices: aerosol, FM200, ig541, CO2, dry chemical powder, TAG, etc.

We are an efficiency-oriented manufacturing company and we design, produce, engineer, and install a variety of fire suppression systems and their devices: aerosol, FM200, IG541, carbon dioxide, dry chemical powder, TAG, and so on.

References

• GA499.1-2010, Aerosol Fire Extinguishing Systems – Condensed Aerosol Fire Extinguishing Device.
• NFPA 2010, Standard for Fixed Aerosol Fire-Extinguishing Systems.
• ISO 15779, Condensed Aerosol Fire Extinguishing Systems.
• ANSI/UL 2775, Standard for Fixed Condensed Aerosol Extinguishing System Units.
• CEN/TR 15276-1/2, Fixed firefighting systems – Condensed aerosol extinguishing systems.
• KIWA-k23003 Fire Extinguishing Systems based on Dry Aerosol.

Innovative technology automatic fire extinguishing systems for substation electrical power distribution room switch transformer