Hệ thống chữa cháy tuabin gió cố định

» Các sản phẩm » Bình chữa cháy khí dung Minisol » Fixed Aerosol Wind Turbine Fire Suppression Systems

Hệ thống chữa cháy tuabin gió cố định

PHÂN LOẠI VÀ TAGS:
Bình chữa cháy khí dung Minisol, Các sản phẩm

hệ thống ngăn chặn bình xịt is an automatic fire extinguishing solution for wind turbines and their Corresponding distribution cabinets.

điều tra

Thông số kỹ thuật
Tính năng, đặc điểm
Ứng dụng
Nhiều vấn đề hơn

What type of fire extinguisher could be a better wind turbine fire suppression system? The answer, Đương nhiên, is the aerosol fire extinguisher. Please listen to our detailed explanation for you.

Các tua bin gió, nacelle is a large enclosed space and is a compartment used to accommodate and protect the main shaft, hộp số, máy phát điện, and other transmission systems of wind turbines, as well as other electrical equipment.

The various electrical equipment and precision components in the wind turbine cabin are high-tech and expensive.

Hơn thế nữa, wind farms are generally located in harsh environments such as grasslands, núi, or oceans, and wind turbine cabins are usually unmanned.

So if a fire occurs in the wind turbine nacelle due to overheating or other reasons, the consequences are devastating.

Fixed aerosol fire extinguishers can be well installed in wind turbine cabins for the following reasons:

There are many electronic components in the wind turbine cabin, and there is not much-remaining space. It is required that the installed fire extinguishers be of small size, and the aerosol fire extinguisher is a small dimension product.
The extinguishing efficiency of an aerosol generator is extremely high, and a 3000-gram aerosol agent can almost cover the entire cabin space.
Aerosol fire extinguishers are environmentally friendly and will not damage the precision instruments and high-value equipment in the wind turbine room after spraying.

thermo bulb aeroso fire extinguisher

Specification of Fixed-Type Aerosol Wind Turbine Fire Suppression Device

The following are the specific specifications of a 3000 grams aerosol fire extinguishing device for wind turbine cabins:

dòng sản phẩm: 3000ST.
Product Function: Wind turbine fire suppression.
Chế độ kích hoạt: bóng đèn nhiệt, phạm vi nhiệt độ từ 57 đến 141 độ C.
Thương hiệu thủy tinh nhiệt: Job Brand from Germany.
kích thước: Đường kính là 21.8 centimeters and the height is 29.5 cm.
Concentration of Aerosol Compound: 100 gam trên mét khối.
bìa Diện tích: 30 mét khối.
The Quality of Aerosol Compound: 3 kg.
The Main Material of the Outer Cylinder: is SUS 304 thép không gỉ.
Tổng trọng lượng sản phẩm: 12.5 kg.
Thời gian phun: 36 đến 38 giây.
Cả đời: 10 năm.
Phương pháp cài đặt: horizontally or vertically.
Chứng chỉ và phê duyệt: EC, Rhos, IP67, GL, CSC, vv.

Ghi chú: There are also distribution cabinets (bảng điều khiển) in the wind turbine nacelles and tower base. Which model is better to install in the distribution cabinet (bảng điều khiển)? Please refer to this page – Hệ thống khử khí dung mini cho bảng điều khiển.

This wind turbine nacelle aerosol fire extinguisher has many features, some of which are listed below:

mật độ thiết kế của nó là 100 gam trên mét khối, it almost can suppress fire in a 30 cubic meters confined space.
Aerosol agents are non-corrosive and will not corrode wind turbine nacelle and distribution cabinet facilities.
It works automatically and does not require any people to operate over there.
hơn nữa, sau khi phát hành, it causes little residue, then is no need to sweep up the wind nacelle cabin.
Its shell is made of 304 thép không gỉ, with a protection level of IP67, which is both waterproof and moisture-proof.

Cái này 3000 grams aerosol agent fire suppression system not only applies in wind turbines but also in more places:

Transport personnel, operators, and installers are advised to pay attention to the following matters:

Special protective measures need to be taken for JOB brand glass bulbs during product transportation, and the glass bulbs should be individually packaged with sponges.
The product is a 9.1-level hazardous material, and specialized export certification is required for sea and air transportation. But there are no restrictions on vehicle transportation.
During the transportation process, operators should handle it with care.
Please store in an environment below 50 degrees Celsius and maintain ventilation.
Please refer to the instruction manual for specific details.